Car fixture how to maintain?
Car fixture how to maintain? At present, as car fixture design and precision increase gradually, many car fixture should be adequately maintenance can prolong the service life of them. Below small make up will come under the simple introduction for you car fixture maintenance methods and steps.
Ensure our fixture basic maintenance:
1. External cleaning of analog block, some base plate, bolt and the position of the pins, it is important to note that clean; Put must remove the activities of components in the corresponding position. & have spent & have spent
2. Keep the car fixture dry their own environmental factors, car fixture of the storage temperature to ensure the ten degrees centigrade below zero to 60 degrees Celsius between; Humidity at 60 degrees; Particles cannot be more than two percent.
3. Maintenance time can be divided into six months or a year for a processing:
(1) check whether there is any wear on bolt hole, there is one problem replaced immediately;
(2) to examine precision slide have loose phenomenon, in a timely manner to add lubricant;
(3) timely check line calibration and coating have fall off and wear;
(4) check the locating datum is rust and wear, a, immediately replace or polishing.
According to the above several ways to maintain, can ensure that your car fixture problem would never occur, good maintenance can lead to an improvement in the efficiency, we once again remind customers friend, car fixture, unlike other fixture products, car fixture with high performance is not able to any loss. So be careful custody you submit products.
